What are the reasons why the fiber laser cutting machine does not emit light?

The most feared thing about the fiber laser cutting machine during use is that the laser cutting machine does not emit light. If the laser does not emit light, it cannot cut normally, which will have a great impact on our production and processing. Therefore, it is necessary to investigate the reason why the laser cutting machine does not emit light, so as to reduce the economic loss caused by the failure of the laser cutting machine.

So what are the reasons why the fiber laser cutting machine does not emit light?
1. For the ammeter of the fiber laser cutting machine, check whether there is a current indication. If there is no current indication, check the laser cutter circuit.
2. Check the water circulation system of the fiber laser cutting machine, and you can also find the cause of insufficient lighting. If there is an abnormality in the water circulation system, the laser cutting machine will not work properly.
3. If you still cannot determine the reason why the fiber laser cutting machine does not emit light after checking the above two points, you should find the laser cutting machine manufacturer for maintenance in time.

When we find that the fiber laser cutting machine does not emit light, we need to stop working immediately, and then we can take the above-mentioned processing methods to repair the fault to ensure that the laser cutting machine can work normally.

For more information please click：
https://www.youtube.com/watch?v=VHyqjoLTHyI
https://www.linkedin.com/company/91096732/admin/