What is the working process of the plate laser cutting machine?
May 05,2023 | TOPTEK
When cutting, in addition to adjusting the relevant parameters of the machine according to the thickness and material of the material, the operator of the plate laser cutting machine must also closely understand the working process of the laser cutting machine through this period of time.
1. Preparation before cutting
Generally speaking, in order to improve the cutting quality, it is necessary to carry out scientific and reasonable cutting design before cutting, and to repeatedly review and correct the drawings.
2. Cutting process
When cutting, in addition to adjusting the relevant parameters of the machine according to the thickness and material of the material, the operator of the plate laser cutting machine must also pay close attention to the cutting quality of the sample, adjust and deal with any problem in time, and then proceed to batch cutting after the proofing is OK.
3. Correctly adjust the focus position
According to the cutting material and thickness, adjust the position of the focus. Generally, thin carbon steel below 5mm is suitable for zero focal length, and the focus is on the surface of the workpiece; aluminum, stainless steel and other workpieces use negative focal length, and the focus is under the surface of the workpiece; for cutting thick steel plates Generally, a positive focal length is used, and the focus is on the surface of the workpiece.
For more information please click：
Comment
